Concrete Repair
High quality concrete repair solutions
For the past 30 years, IBC have consistently provided high quality concrete repair solutions to the Irish construction industry. Our detailed technical knowledge and experience allows us to draw products from each of the below ranges in order to develop tailored solutions that meet your individual needs.
- Polymer modified systems
- Dry spray repair mortar
- Corrosion Inhibitors
- Cementitious based systems
- Epoxy based systems
----------------------------------------------------------------------------------
Polymer modified systems
- A fast-setting, 2 component, polymer modified cementitious repair mortar.
- For use in repairs to concrete sections.
- A quick setting, polymer modified, fibre reinforced structural repair mortar with corrosion inhibitors.
- For use in structural concrete repair in marine environments, concrete repairs affected by repeated loads and where shorter set times are required
- A normal setting, polymer modified, fibre reinforced structural repair mortar with corrosion inhibitors.
- For use in structural concrete repair in marine environments, concrete repairs affected by repeated loads.
- CONCRESEAL®-5 is a polymer-modified and cement-based single component mortar.
- It is specially designed for both superficial cosmetic repair and leveling of renders and concrete surfaces in very thin layers and feather edging, with a maximum thickness up to 5 mm.
----------------------------------------------------------------------------------
Dry spray repair mortar
- Single component mortar for the repair of large surfaces by dry method spraying.
----------------------------------------------------------------------------------
- A protection coating against acid or alkali corrosion to steel reinforcement in concrete.
- For use in protection against corrosion in reinforcement steel.
- Oxide converter and anti-corrosive protection for reinforcing rods and all other iron or steel surfaces.
----------------------------------------------------------------------------------
- Two component mortar for restoration of industrial concrete paving in minimum thickness description.
- Used for restoration of industrial roads, patch eroded concrete floors or to raise height, For non-slip ramp constructions, it is resistant to traffic wear.
- Non-shrink, quick setting structural repair mortar for concrete and masonry.
- For general repair and restoration work on structural concrete.
- - A quick setting hydraulic mortar for stopping water leaks.
- For repairs to concrete water pipes, anchoring of bolts etc. Non-toxic. Suitable for use with drinking water.
- Styrene-butadiene co-polymer latex specially designed for use with cementitious mixes.
- For use in concrete repair, bonding, floor screeds, waterproofing and tanking.
----------------------------------------------------------------------------------
Epoxy based systems
EPOXY BONDING AND REPAIR MORTARS
- Two-component epoxy repair bonding adhesives.
- For bonding of metal plates to concrete or construction elements to one another.
SURFACE CURING COMPOUND
- Acrylic resin based multi-role curing, sealing and protective membrane for concrete.
- A concrete curing agent used to eliminate the requirement for water curing. (For surfaces subject to further finishing treatments)
CHEMICAL ANCHORS
- A range of chemical anchors both polyester and epoxy. Available in both cartridge and pouring grades.
- For holding down bolts, fixing of re-bars in concrete and masonry.
