Click On Your Area Of Interest

structural waterproofing concrete repair
flooring plastering rendering
damproofing remedial universal
Contact Us

Damp-proofing & Remedial                      Download Brochure

In conjunction with our supply partners Drizoro from Spain and Safeguard from the UK, IBC offer a full range of Damp-proofing and Remedial products, that meet all relevant European Standards. Whether your requirement is for a simple product to prevent water ingress into a building, or for the latest technology available for the injection of a DPC system into a building, IBC have the technical knowledge and the products for the perfect solution.

  

-----------------------------------------------------------------------------------------

Bonding & adhesive additives

 

I-BOND SBR

  • BOND SBR is styrene-butadiene co-polymer latex specifically designed for use with cementitious mixes.
  • I BOND SBR is designed as an admixture for concrete repair, floor screeds and toppings, external rendering, waterproofing and tanking, fixing brick slips and tiles, corrosion protection of steel, silage pit lining and protection.

view pdf

download pdf

 

GENERAL PURPOSE PVA

  • White opaque non-toxic PVA emulsion.
  • Used as a bonder, sealer and adhesive.

view pdf

download pdf

 

----------------------------------------------------------------------------------

Repair mortars

 

                Did you know?

 - Maxplug sets even under water

MAXPLUG

  • Quick setting hydraulic mortar for stopping leaks.
  • For use in sealing of leaks in concrete and solid masonry. Emergency plugging of gas leaks and repairs to concrete pipes.

view pdf

download pdf


----------------------------------------------------------------------------------

Waterproof coatings

 

MAXSEAL SUPER

  • Cement based waterproof coasting with crystallisation and osmotic properties.
  • For waterproofing of drinking water tanks, exterior walls, basements, swimming pools.

view pdf

download pdf

 


------------------------------------------------------------------------------------------------------

Water repellent

MAXCLEAR D

  1. Transparent silicone water repellent for traditional or limestone facades.
  2. For use on limestone facades and interior plasters, plasterboards, bricks, roof tiles and single layer mortars.

view pdf

download pdf

 

MAXCLEAR

  1. A high quality siloxane water-repellent for the transparent protection of brickwork and certain types of artificial and natural stone.

view pdf

download pdf

 

 ----------------------------------------------------------------------------------------------------

Mould removing solution

 

IBC FUNGICIDAL WALL SOLUTION (CONCENTRATE)

  1. IBC Fungicidal Wall Solution is an aqueous fungicidal solution for treating and removing from building materials fungi and other growth such as moss and mildew.
  2. To render sterile masonry, brickwork, plaster, concrete etc. which are infected by the Dry Rot fungus or other growths.
  3. It may be surface applied to walls and floors or injected into masonry.

view pdf

download pdf

 

 

--------------------------------------------------------------------------

Chemical damp-proof systems

 

IBC LIQUID DAMPROOF INJECTION SYSTEM

  1. Chemical damp-proofing injection agent for prevention of rising damp
  2. or as a corrective treatment for rising damp in solid brick/block walls in masonry..

 

DRYZONE CRÈME

  1. Water repellent crème used for the treatment of rising damp in masonry.
  2. As a corrective & preventative treatment against rising damp in solid brick walls, cavity walls, stone and rubble infill walls.

view pdf

download pdf

 

----------------------------------------------------------------------------------

Protection-drainage boards

OLDROYD XV

  • Oldroyd Xv is a tough, studded polypropylene cavity drainage membrane.
  • Oldroyd Xv is being used for; its special stud pattern creates an air-gap, allowing the underlying substrate to breathe, whilst providing a waterproof and vapour-proof barrier. It can also be used to protect buildings from ground gases such as radon and methane.

view pdf

download pdf

 

 

OLDROYD XV 20

  • Cavity drain membrane for waterproofing and or drainage of basement floors and ground gas protection e.g. methane and radon.
  • For use on basement floors and ground gas protection.

view pdf

download pdf

 

 

OLDROYD XV 20 GREEN

  1. 20mm stud membrane drainage system.
  2. For use on pitched, sedum and green roofs.

 


OLDROYD XV 20 GREEN EXTRA

  1. 20mm perforated membrane drainage system.
  2. For use in planter boxes, flat roofs, green and brown roofs.

view pdf

download pdf



OLDROYD XS

  • Oldroyd Xs is a tough, gas-tight, damp-proofing membrane that can be laid on top of damp concrete floors or newly laid floor slabs.

view pdf

download pdf

 

---------------------------------------------------------------------------

Wood treatments

FUNGICIDE/INSECTICIDE

  1. Available both in concentrated liquid, gel or tube.
  2. The liquid is for treatment of small sectional timber and may also be used as a masonry sealant against dry rot. The paste is a treatment for large section timber and the tubes are for treatment of large dimensioned timbers with dry rot.

 

ECO FRIENDLY WOOD PRESERVATIVE

  1. A high quality, colour fast, water-based wood preservative.
  2. For use as a preventative treatment against wood boring insects and wood rotting fungi in construction timbers.
  3. Green, Brown, Clear.

view pdf

download pdf

 

----------------------------------------------------------------------------------

Water sealing injection systems

 

MAXURETHANE INJECTION

  • Two component polyurethane water cut- off and soil stabilisation grout system.

view pdf

download pdf

 

MAXURETHANE INJECTION-MONO

  1. One component polyurethane water cut- off and soil stabilisation grout system.

view pdf

download pdf

 

MAXURETHANE FLEX

  1. Flexable single component polyurethane resin for water cut-off.

view pdf

download pdf

 

MAXEPOXY INJECTION

  1. Is an epoxy formulation of very low viscosity for pouring or injection under pressure for bonding of concrete, wood or ceramics.

view pdf

download pdf

 

MAXGROUT INJECTION

  1. Is a very fluid cement–based injection mortar for consolidating and fillings of cavities.

view pdf

download pdf