Did you know?
- Cemtobent CS has self-healing properties
- Cemtobent CS is root resistant &
radon tight
Structural Waterproofing
At IBC, Innovation and Specialised Solutions
aren’t just “buzz
words“.
They’re the foundation of our business.
IBC offers total waterproofing solutions based on the latest
available technology. Our product range features bentonite, cementitious,
bituminous and PU based waterproofing systems.
Click the image below to enlarge
Products by Application area
Products by Product Base
- Bentonite based systems
- Water Swelling Polymer Membranes
- Re-injectable Sealing system
- Bituminous based systems
- Protection drainage boards
- Cementitious based systems
- Acrylic based systems
- Polyurethane based systems
----------------------------------------------------------------
Bentonite based systems
Bentonite Powder: CEMproof IBECO SEAL 80
- Sodium bentonite with excellent absorbtion characteristics
- Application: Basal and cap sealing of landfills, lubrication layer for caisson sinking and pipe jacking, highly plastic clay cores for dams and river barrages
CEMTOBENT
DS (Double Seal Sealing System) 
- A unique bentonite membrane system designed for Structural Waterproofing below ground.
- For use in below ground Structural Waterproofing of tunnels, foundations, underground car parks, basements etc.
CEMTOBENT CS (Combi Seal Sealing System)
- A unique Bentonite membrane system designed for Structural Waterproofing below ground. Radon approved.
- For use in below ground Structural Waterproofing of roof gardens, tunnels, foundations, underground car parks, basements etc. Approved for use as a screen against gases such as radon, methane etc.
- Swellable bentonite water-stop tape.
- For use as a water-stop in non-movement construction joints.
Did you know?
- Quellmax Plus has a guaranteed rain protection for up to 3 days
- Swellable bentonite water-stop tape with crystallisation additives. QUELLMAX has a unique patented rain protection.
- For use as a water-stop in non-movement construction joints.
- CEMswell is a hydrophilic expanding rubber sealing material that is intended mainly for sealing of joints in tunnels and shafts.
- For use as a rubber sealing system in tunnels and shafts.
- A revolutionary water-stop steel plate system, which replaces the traditional PVC waterbar.
- For use in all non-movement construction joints both vertical and horizontal.
BPA ACCESSORIES
- CEMTOPASTE
- CEMTOBENT POWDER
- QUELLMAX FITTING RAIL
- OMEGA HOLDER FOR CEMFLEX VB
- CEMFLEX SEALING TAPE
- WATERBAR CONSTRUCTION JOINT, INTERNAL
- WATERBAR, INTERNAL WITH SPRING STEEL REINFORCEMENT
- EXPANSION JOINT, INTERNAL (SP)
- EXPANSION JOINT, INTERNAL
- CONSTRUCTION JOINT, EXTERNAL
- EXPANSION JOINT, EXTERNAL
- CAPPING JOINT BELTS, EXTERNAL
- CEMPROOF PVC WATERSTOPS/WATERBAR
- CEMPROOF CEMTECH PIPE
- CEMPROOF CEMTECH JOINT RAIL SYSTEM
- CEMPROOF SEAL STOP F
- CEMPROOF CRACK SEAL T
- CEMPROOF STEEL PACKER
- CEMPROOF AQUA STOP
- CEMPROOF CEMSTAR GLUE
- CEMPROOF CEM 423
- CEMPROOF CEM 805
- CEMPROOF POR FÜLL
- CEMPROOF CEMDRAIN
- CEMPROOF TERMINATION RAIL
----------------------------------------------------------------------------------
Water Swelling Polymer Membranes
- EasySeal is an ultra light weight, needle punched non-woven structural waterproofing membrane impregnated with water absorbing and water swelling polymer.
- SilverSeal is an ultra light weight, needle punched non-woven structural waterproofing membrane impregnated with water absorbing and water swelling polymer.
- SilverSeal is the modified EasySeal with a UV-resistant PE-sheet
----------------------------------------------------------------------------------
Re-injectable Sealing system
PREDIMAX INJECTION HOSE SYSTEM
- An injection hose system for the sealing of construction joints in concrete structures. Available in two grades; PREDIMAX 11 and PREDIMAX 19
- A life long system that allows re-injection for the sealing of construction joints in underground and over-ground civil engineering and tunnel projects.
----------------------------------------------------------------------------------
Bituminous based systems
- A BBA approved bituminous self-adhesive membrane with cross-laminated polyethylene film finish.
- For use in waterproofing of walls and foundations.
- A BBA approved bituminous self-adhesive membrane with cross-laminated polyethylene film finish which
also acts as a screen against gases such as methane, radon etc. - For use in waterproofing foundations and cold wall chambers.
- TEXSELF FV 2C is an elastomeric SBS bitumen-based waterproofing membrane, self- adhesive on both sides, with glass fibre felt reinforcement, and easily removable silicone film on both sides
- Texself FV 2C is especially suitable for waterproofing of pitched roofs when installation of insulation is required
- Used to attach protection boards to Texself membranes
- Membrane with 100-micron high density polyethylene film finish. Easy to apply, with excellent bonding and good mechanical properties.
- For use on buried walls and tanks.
- Membrane with 100-micron high density polyethylene film reinforcement. Flexible membrane, easily adapted to substrates and with exceptional elongation capacity (>300% ).
- For use on walls, bathrooms, terraces and balconies.
- An elastomeric SBS bitumen-based waterproofing membrane reinforced with polyester felt, with a non-woven polyester finish on the upper side and thermo fusible film on the underside.
- For use in car park roofs, highway bridge decks or concrete slabs.
TEXSA ACCESSORIES
- TEXSA PRIMER
- EMUFAL 1
- JUNTER FLEX
---------------------------------------------------------------------------------
Protection drainage boards
- DRENTEX IMPACT 100 is a sheet drain made up of a three-dimensional polystyrene structure with a polypropylene geotextile on one side
- Drainage of walls: low water collection
- DRENTEX IMPACT 200 is a sheet drain made up of a three-dimensional polystyrene structure with a polypropylene geotextile on one side
- Drainage of walls and floors: high water collection.
- DRENTEX PROTECT 40 is a high-density polyethylene (HDPE) dimpled sheet.
- Chamber formation sheet, and protection of walls and floors. Protection of waterproofing membranes.
- A polypropylene membrane designed to provide a method of creating dry walls and floors in new-build and refurbishment contracts.
- For covering damp and contaminated walls. Basement conversions. Ground gas protection.
- A polypropylene membrane designed to provide a method of creating dry walls and floors in the larger
commercial basements with significant water ingress. - For basement waterproofing, areas of high water ingress, ground gas protection and waterproofing of contiguous and secant piling.
- A durable perforated membrane with a 20mm deep stud designed specifically for use in green and living roofs.
- For flat green roofs and roof gardens. Brown and bio diverse roofs.
- A studded polypropylene waterproof membrane with a special mesh welded to one side that allows plaster to bond to the membrane.
- For basement waterproofing, barn conversions and damp or contaminated substrates.
OLDROYD ACCESSORIES
- OVERSEAL TAPE 75/200mm WIDE
- FLEECE TAPE 110mm WIDE
- SEALING TAPE 30mm WIDE
- DRAINAGE CHANNEL
- PIPE COLLARS
- PLASTER PLUGS
- BRICK PLUG & COMPRESSION SEAL
- GUN PLUGS
- GEOTEXTILE FLEECE
----------------------------------------------------------------------------------
Cementitious based systems
- A quick setting hydraulic mortar for stopping leaks under pressure.
- To repair active water leaks in concrete structures, anchoring of bolts etc. Nontoxic. Suitable for use with drinking water.
Did you know?
- Maxseal Super may be applied by brush, spray or dusting methods
Did you know?
- Maxseal Flex is a non-toxic coating against positive and negative water pressure
- Cement based waterproof coating with crystallisation and osmotic properties.
- For waterproofing of basements and below grade structures subject to positive or negative water pressure.
- A high performance two component flexible waterproof coating.
- For waterproofing of below grade structures such as basements, retaining walls and foundations.
- Cement based waterproof coating for concrete and masonry.
- A waterproof coating for drinking water tanks. Waterproofing of swimming pools, basements and elevator pits.
- MAXSEAL M is a single component mortar made of a mixture of cements, selected aggregates, special additives and synthetic resins which provides a high performance waterproof coating for concrete and masonry.
- MAXSEAL FOUNDATION is a cement based product which, together with special additives and selected aggregates gives it waterproofing characteristics, whether the foundations are in concrete or masonry.
- Gives great protection to foundation concrete thanks to its high resistance to aggressive waters.
- Can also be used as waterproofing layer or barrier against humidity by capillarity on the different work units.
----------------------------------------------------------------------------------
Acrylic based systems
- A waterproof elastic acrylic coating for all types of roofs.
- For waterproofing of all types of roofs and terraces.
- A single component elastic waterproof coating for light traffic roofs and terraces.
- For waterproofing of all types of roofs and terraces which will be subjected to pedestrian and light vehicular traffic.
- A wearing protective coating for surfaces waterproofed with MAXELASTIC.
- For protection of MAXELASTIC against damages caused by both pedestrian and vehicular traffic.
- MAXSEAL-Y is a water-based and single component, waterproof flexible acrylic coating, especially formulated for gypsum and plaster walls
- For indoors waterproofing of gypsum and plaster walls.
----------------------------------------------------------------------------------
Polyurethane based systems
- Polyurethane elastomeric membrane for waterproofing roofs and outdoor areas.
MAXELASTIC PUR CATALYST
- Catalyst used to accelerate the setting time of Maxelastic Pur.
- A is a one component and aliphatic polyurethane –based coating used as a protective / wearing coating for Maxelastic PUR.
- MAXPOX FLEX is a two-component, solvent-free, flexible and waterproof epoxy formulation suitable for use on concrete and metal substrates.
- Waterproofing and protective coating of drinking water tanks
- Waterproofing and chemical protection for concrete and metal surfaces in underground works, foundations, cooling towers, sewers, water pipes, etc.
- Preparation of self-levelling epoxy mortars for coating of concrete slabs subject to high wearing in garages, warehouses, sport centres, etc.
- Waterproofing and coating of concrete structures subject to movements.
----------------------------------------------------------------------------------
CEMTOBENT DS (Double Seal Sealing System)
- A unique bentonite membrane system designed for Structural Waterproofing below ground.
- For use in below ground Structural Waterproofing of tunnels, foundations, underground car parks, basements etc.
CEMTOBENT CS (Combi Seal Sealing System)
- A unique Bentonite membrane system designed for Structural Waterproofing below ground. Radon approved.
- For use in below ground Structural Waterproofing of roof gardens, tunnels, foundations, underground car parks, basements etc. Approved for use as a screen against gases such as radon, methane etc.
- POXY–TAR COATING FOR WATERPROOFING AND PROTECTION OF CONCRETE AND METAL SURFACES
- Waterproofing of concrete on foundations, pipe lines and underground structures.
- Chemical protection and waterproofing for concrete and metal substrates in wastewater treatment plants, cooling towers, water reservoirs, etc
- A one-component and liquid product ready to use, based on coal-tar free, moisture-curing special bitumen-polyurethane resins that provides a waterproofing elastomeric membrane designed for protection and waterproofing of concrete on non-exposed surfaces.
- MAXSEAL FOUNDATION is a cement based product which, together with special additives and selected aggregates gives it waterproofing characteristics, whether the foundations are in concrete or masonry.
- Gives great protection to foundation concrete thanks to its high resistance to aggressive waters.
- Can also be used as waterproofing layer or barrier against humidity by capillarity on the different work units.
- Swellable bentonite water-stop tape.
- For use as a water-stop in non-movement construction joints.
- Swellable bentonite water-stop tape with crystallisation additives. QUELLMAX has a unique patented rain protection.
- For use as a water-stop in non-movement construction joints.
- CEMswell is a hydrophilic expanding rubber sealing material that is intended mainly for sealing of joints in tunnels and shafts.
- For use as a rubber sealing system in tunnels and shafts.
- A revolutionary water-stop steel plate system, which replaces the traditional PVC waterbar.
- For use in all non-movement construction joints both vertical and horizontal.
CEMPROOF PVC WATERSTOPS/WATERBARS
- WATERBAR CONSTRUCTION JOINT, INTERNAL
- WATERBAR, INTERNAL WITH SPRING STEEL REINFORCEMENT
- EXPANSION JOINT, INTERNAL (SP)
- EXPANSION JOINT, INTERNAL
- CONSTRUCTION JOINT, EXTERNAL
- EXPANSION JOINT, EXTERNAL
- CAPPING JOINT BELTS, EXTERNAL
- CEMTOPASTE
- CEMTOBENT POWDER
- QUELLMAX FITTING RAIL
- OMEGA HOLDER FOR CEMFLEX VB
- CEMFLEX SEALING TAPE
- CEMPROOF CEMTECH PIPE
- CEMPROOF CEMTECH JOINT RAIL SYSTEM
- CEMPROOF SEAL STOP F
- CEMPROOF CRACK SEAL T
- CEMPROOF STEEL PACKER
- CEMPROOF AQUA STOP
- CEMPROOF CEMSTAR GLUE
- CEMPROOF CEM 423
- CEMPROOF CEM 805
- CEMPROOF POR FÜLL
- CEMPROOF CEMDRAIN
- CEMPROOF TERMINATION RAIL
BPA ACCESSORIES
Re-injectable Sealing systems
PREDIMAX INJECTION HOSE SYSTEM
- An injection hose system for the sealing of construction joints in concrete structures. Available in two grades; PREDIMAX 11 and PREDIMAX 19
- A life long system that allows re-injection for the sealing of construction joints in underground and over-ground civil engineering and tunnel projects.
- Bituminous based systems
- A BBA approved bituminous self-adhesive membrane with cross-laminated polyethylene film finish.
- For use in waterproofing of walls and foundations.
- A BBA approved bituminous self-adhesive
membrane with cross-laminated polyethylene film finish which
also acts as a screen against gases such as methane, radon etc. - For use in waterproofing foundations
and cold wall chambers.
- Membrane with 100-micron high density polyethylene film finish. Easy to apply, with excellent bonding and good mechanical properties.
- For use on buried walls and tanks.
TEXSA ACCESSORIES
- TEXSA PRIMER
- EMUFAL 1
- JUNTER FLEX
- TEXSELF FV 2C
-Cementitious based systems
- A quick setting hydraulic mortar for stopping leaks under pressure.
- To repair active water leaks in concrete structures, anchoring of bolts etc. Nontoxic. Suitable for use with drinking water.
- Cement based waterproof coating with crystallisation and osmotic properties.
- For waterproofing of basements and below grade structures subject to positive or negative water pressure.
- A high performance two component flexible waterproof coating.
- For waterproofing of below grade structures such as basements, retaining walls and foundations.
- Cement based waterproof coating for concrete and masonry.
- A waterproof coating for drinking water tanks. Waterproofing of swimming pools, basements and elevator pits.
----------------------------------------------------------------------------------
- An elastomeric SBS bitumen-based waterproofing membrane reinforced with polyester felt, with a non-woven polyester finish on the upper side and thermo fusible film on the underside.
- For use in car park roofs, highway bridge decks or concrete slabs.
- A is a one component and aliphatic polyurethane –based coating used as a protective / wearing coating for Maxelastic PUR.
-------------------------------------------------------------------------------
- Membrane with 100-micron high density polyethylene film reinforcement. Flexible membrane, easily adapted to substrates and with exceptional elongation capacity (>300% ).
- For use on walls, bathrooms, terraces and balconies.
- An elastomeric SBS bitumen-based waterproofing membrane reinforced with polyester felt, with a non-woven polyester finish on the upper side and thermo fusible film on the underside.
- For use in car park roofs, highway bridge decks or concrete slabs.
- Cement based waterproof coating with crystallisation and osmotic properties.
- For waterproofing of basements and below grade structures subject to positive or negative water pressure.
- A high performance two component flexible waterproof coating.
- For waterproofing of below grade structures such as basements, retaining walls and foundations.
- A waterproof elastic acrylic coating for all types of roofs.
- For waterproofing of all types of roofs and terraces.
- An elastic acrylic coating, single-component specially formulated for all types of roofs.
- For waterproofing, protecting and filling in façades, partition walls, joints between chimneys and tiles. For treatment and waterproofing of joints in facades and roofs.
- Polyurethane elastomeric membrane for waterproofing roofs and outdoor areas.
-------------------------------------------------------------------------------
- A single component elastic waterproof coating for light traffic roofs and terraces.
- For waterproofing of all types of roofs and terraces which will be subjected to pedestrian and light vehicular traffic.
- A wearing protective coating for surfaces waterproofed with MAXELASTIC.
- For protection of MAXELASTIC against damages caused by both pedestrian and vehicular traffic.
- A is a one component and aliphatic polyurethane –based coating used as a protective / wearing coating for Maxelastic PUR.
-------------------------------------------------------------------------------
- Polyurethane elastomeric membrane for waterproofing roofs and outdoor areas.
- A high performance two component flexible waterproof coating.
- For waterproofing of below grade structures such as basements, retaining walls and foundations.
- A waterproof elastic acrylic coating for all types of roofs.
- For waterproofing of all types of roofs and terraces.
